OPTOTRONIC FIT AP

Product family features
  • Supply voltage: 220…240 V
  • Line frequency: 50 Hz | 60 Hz
  • Line voltage: 198…264 V
  • According to EN 61347-1, 61347-2-13, 62384
  • RI suppression according to EN 55015:2007+A1:2007/CDN
  • Line harmonics according to EN 61000-3-2
  • Immunity according to EN 61547
  • Lifetime: up to 100,000 h
  • SELV system
Product family benefits
  • Higher quality of light thanks to low output ripple current
  • High flexibility with four different output currents from one driver
  • Small housing for flexible luminaire designs
  • High efficiency

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT FIT 18/220- 240/350 CS
20…51 V 200 / 250 / 300 / 350 mA 210.0 mm 30.0 mm 21.0 mm
OT FIT 35/220...240/700 CS
27…54 V 500 / 600 / 650 / 700 mA 280.0 mm 30.0 mm 21.0 mm
OT FIT 55/220-240/1A0 CS
27…54 V 800 / 900 / 975 / 1050 mA 280.0 mm 30.0 mm 21.0 mm

Information about Family

Areas of application
  • Suitable for luminaires of protection class I
  • Suitable for indoor SELV installations
  • Luminaires with flexible current setting (Tri-Tap) or factory-set fixed current
  • Suitable for linear and area luminaires
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads