OT FIT 120/220…240/750 D LT2 L

Product family benefits
  • Flexible current setting (LEDset2)
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High quality of light thanks to low output ripple current
  • Very high efficiency
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of application
  • Linear lighting for office, education, industry, storage areas and retail
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for installation in emergency lighting systems according to EN 60598-2-22
  • Suitable for luminaires of protection class I
German innovation awards 2019 winner

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

0/50/60 Hz

Input voltage AC

198…264 V

Input voltage DC

176…276 V

Current set

LEDset

Total harmonic distortion

< 5 %

Power factor λ

> 0.99

Efficiency in full-load

92 %

at 230 V, 50 Hz

Device power loss

12 W

Protective conductor current

<0.5 mA

Inrush current

70 A

Max. ECG no. on circuit breaker 10 A (B)

8

Max. ECG no. on circuit breaker 16 A (B)

13

Max. ECG no. on circuit breaker 25 A (B)

-

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

54…216 V

U-OUT (working voltage)

< 250 V

Nominal output current

250…700 mA

±5%

Output current LEDset open

250 mA

Output current LEDset shorted

750 mA

Default output current

250 mA

LEDset deactivated

Output current tolerance

±5 %

Output ripple current (100 Hz)

< 1 %

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

13.5…120 W

Maximum output power

120 W

Galvanic isolation

Non isolated

Galvanic isolation primary/secondary

-

Dimensions & weight

Mounting hole spacing, length

350.0 mm

Product weight

290.00 g

Cable cross-section, input side

0.5…1.5 mm²

Cable cross-section, output side

0.5…1.5 mm²

Wire preparation length, input side

8.5…9.5 mm

Wire preparation length, output side

8.5…9.5 mm

Length

360.0 mm

Height

21.0 mm

Width

30.0 mm

Colors & materials

Casing material

Metal

Temperatures & operating conditions

Ambient temperature range

-25…+60 °C

Maximum temperature at tc test point

75 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 / 100000 h

At maximum Tc = 75°C / 10% failure rate / At Tc = 65°C / 10% failure rate

Additional product data

Encapsulated

No

Capabilities

Dimmable

No

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I

Suitable for emergency lighting

Yes

Type of connection, input side

Push terminal

Type of connection, output side

Push terminal

Number of channels

1

Programming

Programming device

LEDset

Certificates & standards

Approval marks – approval

CE / EL / VDE-ENEC / VDE-EMC / EAC / CCC / BIS / RCM

Standards

Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 62384/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 61547

Protection class

I

Type of protection

IP20

Logistical data

Commodity code

850440839000

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

30-09-2022

Primary Article Identifier

4052899497900

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

a48e3872-9602-4d07-a56f-42bebc15079b

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899497900 UNV

Unpacked

1 360mm x 30mm x 21mm 290.00g 0.23dm³
4052899497917 VS

Shipping box

20 385mm x 160mm x 100mm 5971.00g 6.16dm³

Downloads

Information about Family

De-risk your business - easy, wide range of usage, flexible.

High efficiency of up to 93% and wide operating windows of up to 750mA pose the highlights of this LED Driver. The current is programmable by LEDSet2 (LT2) and a low ripple contributes to the lighting quality. This device is also suitable for emergency lighting units.
Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile scope of application due to output power range of up to 120 W
  • Supply voltage: 220…240 V
  • Available with output current range: up to 750 mA
  • Non-isolated drivers
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT FIT 35/220…240/350 D LT2 L
54…216 V 65…350 mA 280.0 mm 30.0 mm 21.0 mm
OT FIT 75/220…240/550 D LT2 L
54…216 V 125…550 mA 280.0 mm 30.0 mm 21.0 mm
OT FIT 120/220…240/750 D LT2 L
54…216 V 250…700 mA 360.0 mm 30.0 mm 21.0 mm