POWERTRONIC OUTDOOR PTo
Product family features
- 3DIM functionality (StepDIM/AstroDIM/DALI)
- Energy Efficiency Index EEI: A2
- Lightning protection: up to 10 kV
- Supply voltage: 220…240 V
- Line frequency: 50…60 Hz
- Line harmonics according to EN 61000-3-2
- Immunity according to EN 61547
- RI suppression: to EN 55015
- Safety: to EN 61347-2-12
- Luminous flux factor 1 compared with CCG operation
- Not suitable for DC operation
Product family benefits
- Energy savings up to 30 % (compared to CCG operation) thanks to 3DIM (except PTo 35)
- High surge protection: up to 3 kV (L-N) / 4 kV (L/N-PE)
- Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL)
- Excellent thermal behavior for very high limit temperatures tc and ta
Products
| Product |
|
|
|
|
|
Data sheet | |||
|---|---|---|---|---|---|---|---|---|---|
|
PTo 35/220…240
|
48.0 mm | 220…240 V | 133.0 mm | 39 W | 4.5 kVp | |||
|
PTo 50/220…240 3DIM
|
48.0 mm | 220…240 V | 133.0 mm | 50 W | 4.5 kVp | |||
|
PTo 70/220…240 3DIM
|
48.0 mm | 220…240 V | 133.0 mm | 73 W | 4.5 kVp | |||
|
PTo 100/220…240 3DIM
|
42.5 mm | 220…240 V | 158.0 mm | 97 W | 4.5 kVp | |||
|
|
PTo 150/220…240 3DIM
|
42.5 mm | 220…240 V | 158.0 mm | 147 W | 4.5 kVp | |||
|
PTo 250/220…240 3DIM
|
60.0 mm | 220…240 V | 170.0 mm | 250 W | 4.5 kVp |
Information about Family
POWERTRONIC OUTDOOR PTo is an electronic control gear (ECG) for use outside in professional lighting installations with high intensity discharge lamps. It gives you 3DIM functionality (StepDIM/AstroDIM/DALI), lightning protection up to 10 kV, an energy efficiency index of A2 and luminous flux factor 1 compared with CCG operation. You can use it outside in luminaires with protection of IP54 or greater, and in luminaires of protection classes I and II. Its many benefits include excellent thermal behavior at very high limit temperatures tc and ta; high surge protection (up to 3 kV (L-N) / 4 kV (L/N-PE); energy savings of up to 30 % compared to CCG operation due to 3DIM functionality (except PTo 35) and the assurance of automatic lamp shutdown in the event of defect or end of life.
Areas of application
- Suitable for luminaires of protection classes I and II
- Suitable for outdoor applications in luminaires with IP > 54
Safety advice
Ballast losses and lamp heat radiation can lead to heat accumulation in a completely closed case. Therefore it is necessary to ensure that the temperature at the measuring point t of the ECG does not exceed the maximum value.
Attention!
For safety reasons disconnect the device before replacing the lamp!